VYR
Sprinklers
|
| Made in Spain.
|
Vyr-36
sprinkler
|
- Made of plastic
- Springs and shaft are stainless steel
- Full circle only
- Standard nozzles are: 4,4 mm and 2,4 mm
- Sprinkler is attached with R¾" thread
- Has also a diffuser pin. Use of the pin reduces range
|
 |
Vyr-70
sprinkler
|
- Made of brass
- Springs and shaft are stainless steel
- Full circle only
- Standard nozzles are: 4,8 mm and 2,4 mm
- Rear nozzle can be plugged
- Sprinkler is attached with R¾" thread
- Basic sprinkler for irrigation and anti-freezing
|
 |
Vyr-60
sectorsprinkler
|
- Made of brass
- Springs and shaft are stainless steel
- Part & full circle
- Standard nozzles are: 4,8 mm and 2,4 mm
- Smaller nozzle can be plugged
- Sprinkler is attached with R¾" thread
- Main nozzle with diffuser pin
|
 |
Vyr-70V
sprinkler
|
- Made of brass
- Springs and shaft are stainless steel
- Full circle only
- Standard nozzles are: 6,4 mm and 4,8 mm
- Smaller nozzle can be plugged
- Sprinkler is attached with R1" thread
|
 |
Vyr-65
sectorsprinkler
|
- Made of brass
- Springs and shaft are stainless steel
- Part & full circle
- Standard nozzles are: 6,4 mm and 3,2 mm
- Smaller nozzle can be plugged
- Sprinkler is attached with R1" thread
|
 |
Vyr-80
gardensprinkler
Vyr-2000 base
|
- Made of brass
- Springs and shaft are stainless steel
- Part & full circle
- Standard nozzle: 4,0 mm
- Nozzle with diffuser pin and adjustable deflector
- Sprinkler is attached with R½" thread
- Special swingarm that does not splash 'off-sector'
- Vyr-2000 is aluminium base for Vyr-80
- Outlet R½" female thread
- 'Gardena'-type express connector
|
|
Vyr-961
pop-up sprinkler
|
- ABS-plastic housing
- Vyr-80 sprinkler inside
- Part & full circle
- Standard nozzle: 4,0 mm
- Connected with R¾" female, bottom or side
- Pop-up 6 cm
- Height 28 cm
|
|
